Scrap All or Subset of Received Parts
Explanation
You can scrap repair parts reported as received directly from the CRO
repair, i.e., when a receive order is not used. An example of such a
situation is when a repair part at arrival is considered as beyond repair at
first inspection, and the customer does not want the repair part to be
returned. Click Receive, then click Change Receipt.
Repair parts can be scrapped as long as the CRO repair is not released
for repair, i.e., a repair order is not yet created. There are two scrap
possibilities:
- Scrap all parts reported as received. The scrap of all parts will be
done with a common scrap reason.
- Scrap a subset of parts reported as received. If Scrap Selected
Parts is chosen, then it is possible to make a selection of parts to
scrap with individual scrap reasons. When the parts are serials or
lot/batch-tracked you have to use this option.
When a receipt has been reported by using a receive order, all scrap
actions must be handled from the receive order.
Prerequisites
- A subset or the total quantity of the repair part must have been
reserved to the CRO Repair.
- An appropriate scrapping cause must have been defined as general
data in the Scrapping Causes page.
System Effects
As a result of this activity, all or a subset of parts are registered as
scrapped.
- If the scrapped part is lot-tracked, but not serial-tracked, then a
history record will be added to the Part Lot Batch
page.
- If the scrapped part is serial-tracked, a history record will be
added to the Part Serial
page. The current position will change from Issued to
Unallocated, the operational condition will change to Non
Operational.
| Action |
Transaction |
| Scrap of repair parts |
INVSCRAP |