Events in Quality Management
You can define some of the quality management events triggered by the
event server. The set up for these events can be done in the solution
manager. For example, when an event occurs, an e-mail or SMS can be sent to
a predefined person. The following application defined quality management events are
available:
Quality Control
SPC Alarm Rules
- ABOVE UCL: An above upper control limit alarm rule violation has occurred
in a control chart.
- BELOW LCL: A below lower control limit alarm rule violation has occurred
in a control chart.
- EIGHT BELOW_ABOVE_CL: A runs up/down of length 8 or greater alarm rule violation has
occurred in a control chart.
- EIGHT OUTSIDE TWO SIGMA: An 8 outside 2 sigma alarm rule violation has occurred in a control
chart.
- FIFTEEN WITHIN ONE SIGMA:
A 15 at or within 1 sigma alarm rule violation has occurred in
a control chart.
- FOUR OF FIVE BEYOND ONE SIGMA:
A 4 out of 5 beyond 1 sigma alarm rule violation has occurred
in a control chart.
- OUT OF SPEC: An out of specification alarm rule violation has occurred in
a control chart.
- RUND DOWN OF EIGHT: An 8 below or above the centerline alarm rule violation has occurred
in a control chart.
- TWO OF THREE BEYOIND TWO SIGMA:
A 2 out of 3 beyond 2 sigma alarm rule violation has occurred
in a control chart.
Variable Result Status
- VARIABLE RESULT STATUS:
An analysis result status has been changed for data type Variable.
Attribute Result Status
- ATTRIBUTE RESULT STATUS: An analysis result status has been changed for data type
Attribute.
Sample Frequency Trigger
- PURCH SAMP FREQ TRIGGER: A control plan
- purchasing trigger has created an analysis.
- MANUF SAMP FREQ TRIGGER: A control plan
- manufacturing trigger has created an analysis.
Sample Frequency Schedule
- INVENT SAMP FREQ SCEHDULE:
An analysis has been created from a control plan
- inventory schedule.
Acceptance Sampling
- ACCEPTANCE SAMLING STATUS:
An analysis result status has been changed for data type
Acceptance Sampling.
- ACCEPTANCE SAMPLING INSPECTION:
Inspection frequency has been changed for a control plan.
Material Review Board
- MRB_PART_DISPOSITIONED: MRB Part Dispositioned.
- PARTS_SUBMITTED_TO_MRB: Parts Submitted to MRB.