Scrap All or Subset of Received Parts
Explanation
You can scrap repair parts reported as received directly from the CRO repair, i.e., when a receive order is not
used. An example of such a situation is when a repair part at arrival is considered as beyond repair at first
inspection, and the customer does not want the repair part to be returned. Click Receive, then
click Change Receipt.
Repair parts can be scrapped as long as the CRO repair is not released for repair, i.e., a repair order is not
yet created. There are two scrap possibilities:
- Scrap all parts reported as received. The scrap of all parts will be done with a common scrap reason.
- Scrap a subset of parts reported as received. If Scrap Selected Parts is chosen, then it is possible
to make a selection of parts to scrap with individual scrap reasons. When the parts are serials or
lot/batch-tracked you have to use this option.
When a receipt has been reported by using a receive order, all scrap actions must be handled from the receive
order.
Prerequisites
- A subset or the total quantity of the repair part must have been reserved to the CRO Repair.
- An appropriate scrapping cause must have been defined as general data in the Scrapping Causes
page.
System Effects
As a result of this activity, all or a subset of parts are registered as scrapped.
- If the scrapped part is lot-tracked, but not serial-tracked, then a history record will be added to the
Part Lot Batch page.
- If the scrapped part is serial-tracked, a history record will be added to the Part Serial page.
The current position will change from Issued to Unallocated, the operational condition will change
to Non Operational.
| Action |
Transaction |
| Scrap of repair parts |
INVSCRAP |