Receive MRO Disassembled Part
Explanation
Through disassembly, parts in a serial structure can be detached and received to inventory as peice parts,
sub-assemblies or partial parts, making them available for disposition or further disassembly. The received part
type can be either position parts or disassembly products. For any given part, you cannot receive a combination of
both types on a single order. Sub-assemblies that need further disassembly must be received as disassembly
products. A proposed location to receive to can been set for the shop order. If no proposed location is set, you
can enter a location for each receipt.
Prerequisites
- The shop order must have reached at least the Released status.
- The MRO disassembly shop order must be completely issued. This means that any disassemblies on a higher level
in the structure must have been completed.
System effects
If Auto report operations is enabled, operations will be reported automatically.
For received serials:
- The serial will be removed from the serial structure.
- If the received serial is the expected serial based on the serial structure, the part serial catalog
structure record will be updated to reflect the fact that the received serial is no longer contained in the
parent serial.
- In the part serial catalog, the operational status of the received serial will be set to Out of
Operation while its operational condition remains Operational or Non-Operational .
- In the part serial catalog, the operational condition of the issued serial will be set to
Non-Operational if its operational condition was previously Operational.
- The current position for the received serial will be set to In Inventory in the part serial
catalog.
- A replacement history record will be created for the received serial.
- The inventory part location for the received serial will be updated to the location into which the part is
received.
- The actual off-log will be updated with the received serial.
- If the received serial is not what was expected based on the serial structure, an information message will be
displayed and a structure mismatch log record will be created. Note that user will need to make changes to the
serial structure to detach the expected serial.
- If the received serial is not an existing serial, both a part serial record in part master and a serial part
record in Fleet and Asset Management will be created.